Filter Leaf Element

PELTECH manufactures vertical and horizontal filter leaf element for replacement of any makes and sizes. Filter leaf are manufactured with 5-ply or 3-ply design, riveted or bolted depending on customer requirements.

Our standard filter leaf is made of 5 ply of wire mesh of different gauge wires. Two outer filtering mesh are Hollander weaves and three inner mesh is a coarse mesh for the discharge of the filtrate and support of the outer layers. The 5-ply wire mesh are held together by a tubular frame & made leak proof by machine riveting.

Filter Leaf Construction & Specification

Construction	Mesh	Wire Thickness (mm)	Aperture (micron)
1 Ply of drainage mesh	Plain Weave, 4 x 4	1.6	4750
2 Ply of support mesh	Plain Weave, 8 x 8	0.7	2470
2 Ply filter mesh	Plain Weave, 60×60 Plain Dutch Weave, 24×110 Reverse Dutch Weave, PZ80	0.18 0.36 x 0.26 0.2 x 0.4	80~200

Filter Leaf Refurbish Service

PELETCH provides the best in re-meshing, rescreening and repairing services for your used or damaged filter leaf. Our facilities and capabilities allow for the inspection, re-mesh, repair or replacement of all makes and models of vertical and horizontal filter leaf in the market.

Advantages
The re-meshed leaves will function as when they were new.
Cost savings of up to 30% over of a new leaf.
Process improvement and higher throughput.
Leaves can be re-meshed up to 4 times for prolonged life.
Leaves from other manufacturers can be re-meshed at our facility.

Refurbishing Process
Customer returns used or damaged leaves to us.
Each leaf is inspected and evaluated.
Old filter mesh is removed and examined.
Interior frame is thoroughly cleaned.
Filter mesh is replaced and reassembly.
If leaf is not able to repair, a replacement new leaf is built as necessary.
Pre-delivery quality checking of each filter leaf.
Filter leaves are crated and shipped.